| Quantity: | |
|---|---|
Product introduction
ASP1060 type filter press is special feed pump, sanlian pump industry group co., LTD in forty years pump product development and manufacturing experience and strong technical strength of impurities, on the basis of comprehensive analysis and according to the operation condition of the filter system characteristics, the use of advanced design theory, research and development of a new generation of filter press feed pump.
The series pump has the advantages of abrasion, no leakage, high reliability and convenient maintenance.
Range of application
It is widely used in industries such as coal, electricity, food, chemical industry and sewage treatment.
Design parameters
Flow: Q = 27.5 ~ 279 m3 / h
Yang cheng: H = 43.5 ~ 80 m
Pressure: P = 0.435 ~ 0.8mpa
Speed: n = 1480 r/min
Output caliber: 65 ~ 125mm (above 125mm, more than 125mm)
Structural characteristics
(1) pressure filter feeding pump is a single-stage cantilever horizontal structure with double-stage impeller positive and reverse installation. The shell is divided into three sections with radial section, and the end face is sealed by "O" ring and connected by a screw rod.
(2) the import is divided into the vortex shell (seal cavity position) and the direction and axial circulation are entered into the pulp, and the outlet is radial discharge.
(3) shaft seal is packing box + auxiliary impeller power seal structure. No leak in operation or stop.
(4) the bearing body and bracket are open in horizontal, and the disassembly and maintenance is simple.
(5) the motor and the pump rotate directly through the elastic coupling.
(6) the pump is rotated clockwise from the driver side.
Model significance
Sectional Drawing
Range Coverage Chart
Product introduction
ASP1060 type filter press is special feed pump, sanlian pump industry group co., LTD in forty years pump product development and manufacturing experience and strong technical strength of impurities, on the basis of comprehensive analysis and according to the operation condition of the filter system characteristics, the use of advanced design theory, research and development of a new generation of filter press feed pump.
The series pump has the advantages of abrasion, no leakage, high reliability and convenient maintenance.
Range of application
It is widely used in industries such as coal, electricity, food, chemical industry and sewage treatment.
Design parameters
Flow: Q = 27.5 ~ 279 m3 / h
Yang cheng: H = 43.5 ~ 80 m
Pressure: P = 0.435 ~ 0.8mpa
Speed: n = 1480 r/min
Output caliber: 65 ~ 125mm (above 125mm, more than 125mm)
Structural characteristics
(1) pressure filter feeding pump is a single-stage cantilever horizontal structure with double-stage impeller positive and reverse installation. The shell is divided into three sections with radial section, and the end face is sealed by "O" ring and connected by a screw rod.
(2) the import is divided into the vortex shell (seal cavity position) and the direction and axial circulation are entered into the pulp, and the outlet is radial discharge.
(3) shaft seal is packing box + auxiliary impeller power seal structure. No leak in operation or stop.
(4) the bearing body and bracket are open in horizontal, and the disassembly and maintenance is simple.
(5) the motor and the pump rotate directly through the elastic coupling.
(6) the pump is rotated clockwise from the driver side.
Model significance
Sectional Drawing
Range Coverage Chart
